Optionalproperties: Partial<Gtk.SizeGroup.ConstructorProps>Internal$signalsCompile-time signal type information.
This instance property is generated only for TypeScript type checking. It is not defined at runtime and should not be accessed in JS code.
Static$gtypeThe direction in which the size group affects requested sizes.
Adds a widget to a Gtk.SizeGroup.
In the future, the requisition of the widget will be determined as the maximum of its requisition and the requisition of the other widgets in the size group. Whether this applies horizontally, vertically, or in both directions depends on the mode of the size group. See Gtk.SizeGroup.set_mode.
When the widget is destroyed or no longer referenced elsewhere, it will be removed from the size group.
the Gtk.Widget to add
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget GObject.Object instance to be updated with the same value of the "active" property of the action GObject.Object instance.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
GObject.Binding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A GObject.Object can have multiple bindings.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Complete version of g_object_bind_property().
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well. The transform_from function is only used in case
of bidirectional bindings, otherwise it will be ignored
The binding will automatically be removed when either the source or the
target instances are finalized. This will release the reference that is
being held on the GObject.Binding instance; if you want to hold on to the
GObject.Binding instance, you will need to hold a reference to it.
To remove the binding, call g_binding_unbind().
A GObject.Object can have multiple bindings.
The same user_data parameter will be used for both transform_to
and transform_from transformation functions; the notify function will
be called once, when the binding is removed. If you need different data
for each transformation function, please use
g_object_bind_property_with_closures() instead.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
Optionaltransform_to: BindingTransformFuncthe transformation function from the source to the target, or null to use the default
Optionaltransform_from: BindingTransformFuncthe transformation function from the target to the source, or null to use the default
Optionalnotify: DestroyNotifya function to call when disposing the binding, to free resources used by the transformation functions, or null if not required
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of
g_object_bind_property_full(), using GClosures instead of
function pointers.
the property on source to bind
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Blocks a handler of an instance so it will not be called during any signal emissions
Handler ID of the handler to be blocked
SignalconnectSignalconnect_Disconnects a handler from an instance so it will not be called during any future or currently ongoing emissions of the signal it has been connected to.
Handler ID of the handler to be disconnected
SignalemitThis function is intended for GObject.Object implementations to re-enforce
a [floating][floating-ref] object reference. Doing this is seldom
required: all GInitiallyUnowneds are created with a floating reference
which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
GObject.Object::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Gets the ID of the buildable object.
Gtk.Builder sets the name based on the ID attribute
of the <object> tag used to construct the buildable.
the ID of the buildable object
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
the data if found, or null if no such data exists.
Gets the current mode of the size group.
the current mode of the size group.
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling GObject.Value.unset.
Note that GObject.Object.get_property is really intended for language bindings, GObject.Object.get is much more convenient for C programming.
The name of the property to get
Return location for the property value. Can be an empty GObject.Value initialized by G_VALUE_INIT (auto-initialized with expected type since GLib 2.60), a GObject.Value initialized with the expected property type, or a GObject.Value initialized with a transformable type
This function gets back user data pointers stored via
g_object_set_qdata().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Returns the list of widgets associated with size_group.
a GLib.SList of widgets. The list is owned by GTK and should not be modified.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Checks whether object has a [floating][floating-ref] reference.
true if object has a floating reference
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than
g_object_notify().
One way to avoid using g_object_notify() from within the
class that registered the properties, and using g_object_notify_by_pspec()
instead, is to store the GParamSpec used with
g_object_class_install_property() inside a static array, e.g.:
typedef enum
{
PROP_FOO = 1,
PROP_LAST
} MyObjectProperty;
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", NULL, NULL,
0, 100,
50,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the GObject.ParamSpec of a property installed on the class of object.
Increases the reference count of object.
Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type
of object will be propagated to the return type (using the GCC typeof()
extension), so any casting the caller needs to do on the return type must be
explicit.
the same object
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
object
Removes a widget from a Gtk.SizeGroup.
the Gtk.Widget to remove
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Sets multiple properties of an object at once. The properties argument should be a dictionary mapping property names to values.
Object containing the properties to set
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a GLib.Quark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the GLib.Quark storage growing unbounded.
name of the key
Optionaldata: anydata to associate with that key
Sets the Gtk.SizeGroupMode of the size group.
The mode of the size group determines whether the widgets in the size group should all have the same horizontal requisition (Gtk.SizeGroupMode.HORIZONTAL) all have the same vertical requisition (Gtk.SizeGroupMode.VERTICAL), or should all have the same requisition in both directions (Gtk.SizeGroupMode.BOTH).
the mode to set for the size group.
Sets a property on an object.
The name of the property to set
The value to set the property to
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
the data if found, or null if no such data exists.
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of
g_object_steal_qdata() would have left the destroy function set,
and thus the partial string list would have been freed upon
g_object_set_qdata_full().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Stops a signal's emission by the given signal name. This will prevent the default handler and any subsequent signal handlers from being invoked.
Name of the signal to stop emission of
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one GObject.Object::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Unblocks a handler so it will be called again during any signal emissions
Handler ID of the handler to be unblocked
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the GObject.Object may be reused in future (for example, if it is
an instance variable of another object), it is recommended to clear the
pointer to null rather than retain a dangling pointer to a potentially
invalid GObject.Object instance. Use g_clear_object() for this.
Virtualvfunc_Virtualvfunc_the constructed function is called by g_object_new() as the
final step of the object creation process. At the point of the call, all
construction properties have been set on the object. The purpose of this
call is to allow for object initialisation steps that can only be performed
after construction properties have been set. constructed implementors
should chain up to the constructed call of their parent class to allow it
to complete its initialisation.
Virtualvfunc_Virtualvfunc_Called at the end of each custom element handled by the buildable.
Gtk.Builder used to construct this object
child object or null for non-child tags
name of tag
Optionaldata: anyuser data that will be passed in to parser functions
Virtualvfunc_Called for each unknown element under <child>.
a Gtk.Builder used to construct this object
child object or null for non-child tags
name of tag
Virtualvfunc_Virtualvfunc_the dispose function is supposed to drop all references to other
objects, but keep the instance otherwise intact, so that client method
invocations still work. It may be run multiple times (due to reference
loops). Before returning, dispose should chain up to the dispose method
of the parent class.
Virtualvfunc_instance finalization function, should finish the finalization of
the instance begun in dispose and chain up to the finalize method of the
parent class.
Virtualvfunc_The getter corresponding to set_id. Implement this
if you implement set_id.
Virtualvfunc_Virtualvfunc_Virtualvfunc_Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
Virtualvfunc_Called when a builder finishes the parsing of a UI definition. It is normally not necessary to implement this, unless you need to perform special cleanup actions. Gtk.Window sets the Gtk.Widget.visible property here.
Virtualvfunc_Sets a property of a buildable object.
It is normally not necessary to implement this, g_object_set_property()
is used by default. Gtk.Window implements this to delay showing itself
(i.e. setting the Gtk.Widget.visible property) until the whole
interface is created.
Virtualvfunc_Stores the id attribute given in the Gtk.Builder UI definition. Gtk.Widget stores the name as object data. Implement this method if your object has some notion of “ID” and it makes sense to map the XML id attribute to it.
Virtualvfunc_the generic setter for all properties of this type. Should be
overridden for every type with properties. If implementations of
set_property don't emit property change notification explicitly, this will
be done implicitly by the type system. However, if the notify signal is
emitted explicitly, the type system will not emit it a second time.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
GObject.Closure to watch
StaticnewStatic_Staticcompat_Optionaldata: anyStaticfind_Staticinstall_Staticinstall_the id for the new property
the GObject.ParamSpec for the new property
Staticinterface_Find the GObject.ParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Staticinterface_Add a property to an interface; this is only useful for interfaces
that are added to GObject-derived types. Adding a property to an
interface forces all objects classes with that interface to have a
compatible property. The compatible property could be a newly
created GObject.ParamSpec, but normally
g_object_class_override_property() will be used so that the object
class only needs to provide an implementation and inherits the
property description, default value, bounds, and so forth from the
interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
GObject.TypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the GObject.ParamSpec for the new property
Staticinterface_Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Staticlist_StaticnewvStaticoverride_the new property ID
the name of a property registered in a parent class or in an interface of this class.
Groups widgets together so they all request the same size.
This is typically useful when you want a column of widgets to have the same size, but you can’t use a Gtk.Grid or Gtk.Box.
In detail, the size requested for each widget in a Gtk.SizeGroup is the maximum of the sizes that would have been requested for each widget in the size group if they were not in the size group. The [mode]Gtk.SizeGroup.set_mode of the size group determines whether this applies to the horizontal size, the vertical size, or both sizes.
Note that size groups only affect the amount of space requested, not the size that the widgets finally receive. If you want the widgets in a Gtk.SizeGroup to actually be the same size, you need to pack them in such a way that they get the size they request and not more. In particular it doesn't make a lot of sense to set [the expand flags]Gtk.Widget.set_hexpand on the widgets that are members of a size group.
Gtk.SizeGroup objects are referenced by each widget in the size group, so once you have added all widgets to a Gtk.SizeGroup, you can drop the initial reference to the size group with GObject.Object.unref. If the widgets in the size group are subsequently destroyed, then they will be removed from the size group and drop their references on the size group; when all widgets have been removed, the size group will be freed.
Widgets can be part of multiple size groups; GTK will compute the horizontal size of a widget from the horizontal requisition of all widgets that can be reached from the widget by a chain of size groups with mode Gtk.SizeGroupMode.HORIZONTAL or Gtk.SizeGroupMode.BOTH, and the vertical size from the vertical requisition of all widgets that can be reached from the widget by a chain of size groups with mode Gtk.SizeGroupMode.VERTICAL or Gtk.SizeGroupMode.BOTH.
Size groups and trading height-for-width
::: warning Generally, size groups don't interact well with widgets that trade height for width (or width for height), such as wrappable labels. Avoid using size groups with such widgets.
A size group with mode Gtk.SizeGroupMode.HORIZONTAL or Gtk.SizeGroupMode.VERTICAL only consults non-contextual sizes of widgets other than the one being measured, since it has no knowledge of what size a widget will get allocated in the other orientation. This can lead to widgets in a group actually requesting different contextual sizes, contrary to the purpose of Gtk.SizeGroup.
In contrast, a size group with mode Gtk.SizeGroupMode.BOTH can properly propagate the available size in the opposite orientation when measuring widgets in the group, which results in consistent and accurate measurements.
In case some mechanism other than a size group is already used to ensure that widgets in a group all get the same size in one orientation (for example, some common ancestor is known to allocate the same width to all its children), and the size group is only really needed to also make the widgets request the same size in the other orientation, it is beneficial to still set the group's mode to Gtk.SizeGroupMode.BOTH. This lets the group assume and count on sizes of the widgets in the former orientation being the same, which enables it to propagate the available size as described above.
Alternatives to size groups
Size groups have many limitations, such as only influencing size requests but not allocations, and poor height-for-width support. When possible, prefer using dedicated mechanisms that can properly ensure that the widgets get the same size.
Various container widgets and layout managers support a homogeneous layout mode, where they will explicitly give the same size to their children (see Gtk.Box.homogeneous). Using homogeneous mode can also have large performance benefits compared to either the same container in non-homogeneous mode, or to size groups.
Gtk.Grid can be used to position widgets into rows and columns. Members of each column will have the same width among them; likewise, members of each row will have the same height. On top of that, the heights can be made equal between all rows with Gtk.Grid.row_homogeneous, and the widths can be made equal between all columns with Gtk.Grid.column_homogeneous.
GtkSizeGroup as GtkBuildable
Size groups can be specified in a UI definition by placing an
<object>element withclass="GtkSizeGroup"somewhere in the UI definition. The widgets that belong to the size group are specified by a<widgets>element that may contain multiple<widget>elements, one for each member of the size group. The ”name” attribute gives the id of the widget.An example of a UI definition fragment with Gtk.SizeGroup: