Optionalproperties: Partial<NM.SettingWirelessSecurity.ConstructorProps>Internal$signalsCompile-time signal type information.
This instance property is generated only for TypeScript type checking. It is not defined at runtime and should not be accessed in JS code.
Static$gtypeWhen WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here. One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.
When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here. One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.
Since 1.12filsIndicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection. One of NM.SettingWirelessSecurityFils.DEFAULT (use global default value), NM.SettingWirelessSecurityFils.DISABLE (disable FILS), NM.SettingWirelessSecurityFils.OPTIONAL (enable FILS if the supplicant and the access point support it) or NM.SettingWirelessSecurityFils.REQUIRED (enable FILS and fail if not supported). When set to NM.SettingWirelessSecurityFils.DEFAULT and no global default is set, FILS will be optionally enabled.
A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".
Key management used for the connection. One of "none" (WEP or no password protection), "ieee8021x" (Dynamic WEP), "owe" (Opportunistic Wireless Encryption), "wpa-psk" (WPA2 + WPA3 personal), "sae" (WPA3 personal only), "wpa-eap" (WPA2 + WPA3 enterprise) or "wpa-eap-suite-b-192" (WPA3 enterprise only).
This property must be set for any Wi-Fi connection that uses security.
Key management used for the connection. One of "none" (WEP or no password protection), "ieee8021x" (Dynamic WEP), "owe" (Opportunistic Wireless Encryption), "wpa-psk" (WPA2 + WPA3 personal), "sae" (WPA3 personal only), "wpa-eap" (WPA2 + WPA3 enterprise) or "wpa-eap-suite-b-192" (WPA3 enterprise only).
This property must be set for any Wi-Fi connection that uses security.
The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
Flags indicating how to handle the NM.SettingWirelessSecurity.leap_password property.
The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
Flags indicating how to handle the NM.SettingWirelessSecurity.leap_password property.
The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "tkip" or "ccmp".
Since 1.10pmfIndicates whether Protected Management Frames (802.11w) must be enabled for the connection. One of NM.SettingWirelessSecurityPmf.DEFAULT (use global default value), NM.SettingWirelessSecurityPmf.DISABLE (disable PMF), NM.SettingWirelessSecurityPmf.OPTIONAL (enable PMF if the supplicant and the access point support it) or NM.SettingWirelessSecurityPmf.REQUIRED (enable PMF and fail if not supported). When set to NM.SettingWirelessSecurityPmf.DEFAULT and no global default is set, PMF will be optionally enabled.
List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed.
Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.
Flags indicating how to handle the NM.SettingWirelessSecurity.psk property.
Flags indicating how to handle the NM.SettingWirelessSecurity.psk property.
Flags indicating how to handle the NM.SettingWirelessSecurity.wep_key0, NM.SettingWirelessSecurity.wep_key1, NM.SettingWirelessSecurity.wep_key2, and NM.SettingWirelessSecurity.wep_key3 properties.
Controls the interpretation of WEP keys. Allowed values are NM.WepKeyType.KEY, in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM.WepKeyType.PASSPHRASE, in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.
Index 0 WEP key. This is the WEP key used in most networks. See the "wep-key-type" property for a description of how this key is interpreted.
Index 1 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.
Index 2 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.
Index 3 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.
When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key index is used by the AP, put that WEP key index here. Valid values are 0 (default key) through 3. Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.
Index 0 WEP key. This is the WEP key used in most networks. See the "wep-key-type" property for a description of how this key is interpreted.
Index 1 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.
Index 2 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.
Index 3 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.
Flags indicating how to handle the NM.SettingWirelessSecurity.wep_key0, NM.SettingWirelessSecurity.wep_key1, NM.SettingWirelessSecurity.wep_key2, and NM.SettingWirelessSecurity.wep_key3 properties.
Controls the interpretation of WEP keys. Allowed values are NM.WepKeyType.KEY, in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM.WepKeyType.PASSPHRASE, in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.
When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key index is used by the AP, put that WEP key index here. Valid values are 0 (default key) through 3. Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.
Since 1.10wps_Flags indicating which mode of WPS is to be used if any.
There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities.
WPS can be disabled by setting this property to a value of 1.
Since 1.10wpsFlags indicating which mode of WPS is to be used if any.
There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities.
WPS can be disabled by setting this property to a value of 1.
The setting's name, which uniquely identifies the setting within the connection. Each setting type has a name unique to that type, for example "ppp" or "802-11-wireless" or "802-3-ethernet".
Adds an encryption algorithm to the list of allowed groupwise encryption algorithms. If the list is not empty, then only access points that support one or more of the encryption algorithms in the list will be considered compatible with this connection.
the encryption algorithm to add, one of "wep40", "wep104", "tkip", or "ccmp"
true if the algorithm was added to the list, false if it was already in the list
Adds an encryption algorithm to the list of allowed pairwise encryption algorithms. If the list is not empty, then only access points that support one or more of the encryption algorithms in the list will be considered compatible with this connection.
the encryption algorithm to add, one of "tkip" or "ccmp"
true if the algorithm was added to the list, false if it was already in the list
Adds a Wi-Fi security protocol (one of "wpa" or "rsn") to the allowed list; only protocols in this list will be used when finding and connecting to the Wi-Fi network specified by this connection. For example, if the protocol list contains only "wpa" but the access point for the SSID specified by this connection only supports WPA2/RSN, the connection cannot be used with the access point.
the protocol to add, one of "wpa" or "rsn"
true if the protocol was new and was added to the allowed protocol list, or false if it was already in the list
Removes all algorithms from the allowed list. If there are no algorithms specified then all groupwise encryption algorithms are allowed.
Removes all algorithms from the allowed list. If there are no algorithms specified then all pairwise encryption algorithms are allowed.
Removes all protocols from the allowed list. If there are no protocols specified then all protocols are allowed.
SignalconnectSignalconnect_Signalemitthe NM.SettingWirelessSecurity.auth_alg property of the setting
the NM.SettingWirelessSecurity.fils property of the setting
Returns the allowed groupwise encryption algorithm from allowed algorithm list.
index of an item in the allowed groupwise encryption algorithm list
the groupwise encryption algorithm at index i
the NM.SettingWirelessSecurity.key_mgmt property of the setting
the NM.SettingWirelessSecurity.leap_password property of the setting
the NM.SettingSecretFlags pertaining to the NM.SettingWirelessSecurity.leap_password
the NM.SettingWirelessSecurity.leap_username property of the setting
the number of groupwise encryption algorithms in the allowed list
the number of pairwise encryption algorithms in the allowed list
the number of security protocols this connection allows when connecting to secure Wi-Fi networks
Returns the allowed pairwise encryption algorithm from allowed algorithm list.
index of an item in the allowed pairwise encryption algorithm list
the pairwise encryption algorithm at index i
the NM.SettingWirelessSecurity.pmf property of the setting
an index into the protocol list
the protocol at index i
the NM.SettingWirelessSecurity.psk property of the setting
the NM.SettingSecretFlags pertaining to the NM.SettingWirelessSecurity.psk
the WEP key index (0..3 inclusive)
the WEP key at the given index
the NM.SettingSecretFlags pertaining to the all WEP keys
the NM.SettingWirelessSecurity.wep_key_type property of the setting
the NM.SettingWirelessSecurity.wep_tx_keyidx property of the setting
the NM.SettingWirelessSecurity.wps_method property of the setting
Removes an encryption algorithm from the allowed groupwise encryption algorithm list.
the index of an item in the allowed groupwise encryption algorithm list
Removes an encryption algorithm from the allowed groupwise encryption algorithm list.
the encryption algorithm to remove, one of "wep40", "wep104", "tkip", or "ccmp"
true if the algorithm was found and removed; false if it was not.
Removes an encryption algorithm from the allowed pairwise encryption algorithm list.
the index of an item in the allowed pairwise encryption algorithm list
Removes an encryption algorithm from the allowed pairwise encryption algorithm list.
the encryption algorithm to remove, one of "tkip" or "ccmp"
true if the encryption algorithm was found and removed; false if it was not.
Removes a protocol from the allowed protocol list.
index of the protocol to remove
Removes a protocol from the allowed protocol list.
the protocol to remove, one of "wpa" or "rsn"
true if the protocol was found and removed; false if it was not.
Sets a WEP key in the given index.
the index of the key (0..3 inclusive)
the WEP key as a string, in either hexadecimal, ASCII, or passphrase form as determined by the value of the NM.SettingWirelessSecurity.wep_key_type property.
StaticnewCreates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget GObject.Object instance to be updated with the same value of the "active" property of the action GObject.Object instance.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
GObject.Binding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A GObject.Object can have multiple bindings.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Complete version of g_object_bind_property().
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well. The transform_from function is only used in case
of bidirectional bindings, otherwise it will be ignored
The binding will automatically be removed when either the source or the
target instances are finalized. This will release the reference that is
being held on the GObject.Binding instance; if you want to hold on to the
GObject.Binding instance, you will need to hold a reference to it.
To remove the binding, call g_binding_unbind().
A GObject.Object can have multiple bindings.
The same user_data parameter will be used for both transform_to
and transform_from transformation functions; the notify function will
be called once, when the binding is removed. If you need different data
for each transformation function, please use
g_object_bind_property_with_closures() instead.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
Optionaltransform_to: BindingTransformFuncthe transformation function from the source to the target, or null to use the default
Optionaltransform_from: BindingTransformFuncthe transformation function from the target to the source, or null to use the default
Optionalnotify: DestroyNotifya function to call when disposing the binding, to free resources used by the transformation functions, or null if not required
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of
g_object_bind_property_full(), using GClosures instead of
function pointers.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
a GObject.Closure wrapping the transformation function from the source to the target, or null to use the default
a GObject.Closure wrapping the transformation function from the target to the source, or null to use the default
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Blocks a handler of an instance so it will not be called during any signal emissions
Handler ID of the handler to be blocked
Compares two NM.Setting objects for similarity, with comparison behavior modified by a set of flags. See the documentation for NM.SettingCompareFlags for a description of each flag's behavior.
a second NM.Setting to compare with the first
compare flags, e.g. NM.SettingCompareFlags.EXACT
true if the comparison succeeds, false if it does not
Compares two NM.Setting objects for similarity, with comparison behavior
modified by a set of flags. See the documentation for NM.SettingCompareFlags
for a description of each flag's behavior. If the settings differ, the keys
of each setting that differ from the other are added to results, mapped to
one or more NM.SettingDiffResult values.
a second NM.Setting to compare with the first
compare flags, e.g. NM.SettingCompareFlags.EXACT
this parameter is used internally by libnm and should be set to false. If true inverts the meaning of the NM.SettingDiffResult.
if the settings differ, on return a hash table mapping the differing keys to one or more %NMSettingDiffResult values OR-ed together. If the settings do not differ, any hash table passed in is unmodified. If no hash table is passed in and the settings differ, a new one is created and returned.
true if the settings contain the same values, false if they do not
Disconnects a handler from an instance so it will not be called during any future or currently ongoing emissions of the signal it has been connected to.
Handler ID of the handler to be disconnected
Duplicates a NM.Setting.
a new NM.Setting containing the same properties and values as the source NM.Setting
Iterates over each property of the NM.Setting object, calling the supplied user function for each property.
user-supplied function called for each property of the setting
This function is intended for GObject.Object implementations to re-enforce
a [floating][floating-ref] object reference. Doing this is seldom
required: all GInitiallyUnowneds are created with a floating reference
which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
GObject.Object::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
the data if found, or null if no such data exists.
Gets the D-Bus marshalling type of a property. property_name is a D-Bus
property name, which may not necessarily be a GObject.Object property.
the property of setting to get the type of
the D-Bus marshalling type of property on setting.
Returns the type name of the NM.Setting object
a string containing the type name of the NM.Setting object, like 'ppp' or 'wireless' or 'wired'.
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling GObject.Value.unset.
Note that GObject.Object.get_property is really intended for language bindings, GObject.Object.get is much more convenient for C programming.
The name of the property to get
Return location for the property value. Can be an empty GObject.Value initialized by G_VALUE_INIT (auto-initialized with expected type since GLib 2.60), a GObject.Value initialized with the expected property type, or a GObject.Value initialized with a transformable type
This function gets back user data pointers stored via
g_object_set_qdata().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
For a given secret, retrieves the NM.SettingSecretFlags describing how to handle that secret.
the secret key name to get flags for
on success, the NM.SettingSecretFlags for the secret
true on success (if the given secret name was a valid property of this setting, and if that property is secret), false if not
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Checks whether object has a [floating][floating-ref] reference.
true if object has a floating reference
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than
g_object_notify().
One way to avoid using g_object_notify() from within the
class that registered the properties, and using g_object_notify_by_pspec()
instead, is to store the GParamSpec used with
g_object_class_install_property() inside a static array, e.g.:
typedef enum
{
PROP_FOO = 1,
PROP_LAST
} MyObjectProperty;
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", NULL, NULL,
0, 100,
50,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the GObject.ParamSpec of a property installed on the class of object.
Optionalpredicate: UtilsPredicateStrthe predicate for which names should be clear. If the predicate returns true for an option name, the option gets removed. If null, all options will be removed.
the option name to request.
the GLib.Variant or null if the option is not set.
Gives the name of all set options.
A null terminated array of key names. If no names are present, this returns null. The returned array and the names are owned by %NMSetting and might be invalidated by the next operation.
the option to get
true if opt_name is set to a boolean variant.
the option to get
true if opt_name is set to a uint32 variant.
If variant is null, this clears the option if it is set.
Otherwise, variant is set as the option. If variant is
a floating reference, it will be consumed.
Note that not all setting types support options. It is a bug setting a variant to a setting that doesn't support it. Currently, only NM.SettingEthtool supports it.
Like nm_setting_option_set() to set a boolean GVariant.
the value to set.
Like nm_setting_option_set() to set a uint32 GVariant.
the value to set.
Increases the reference count of object.
Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type
of object will be propagated to the return type (using the GCC typeof()
extension), so any casting the caller needs to do on the return type must be
explicit.
the same object
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
object
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Sets multiple properties of an object at once. The properties argument should be a dictionary mapping property names to values.
Object containing the properties to set
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a GLib.Quark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the GLib.Quark storage growing unbounded.
name of the key
Optionaldata: anydata to associate with that key
Sets a property on an object.
The name of the property to set
The value to set the property to
For a given secret, stores the NM.SettingSecretFlags describing how to handle that secret.
the secret key name to set flags for
the NM.SettingSecretFlags for the secret
true on success (if the given secret name was a valid property of this setting, and if that property is secret), false if not
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
the data if found, or null if no such data exists.
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of
g_object_steal_qdata() would have left the destroy function set,
and thus the partial string list would have been freed upon
g_object_set_qdata_full().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Stops a signal's emission by the given signal name. This will prevent the default handler and any subsequent signal handlers from being invoked.
Name of the signal to stop emission of
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one GObject.Object::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Convert the setting (including secrets!) into a string. For debugging purposes ONLY, should NOT be used for serialization of the setting, or machine-parsed in any way. The output format is not guaranteed to be stable and may change at any time.
an allocated string containing a textual representation of the setting's properties and values, which the caller should free with g_free()
Unblocks a handler so it will be called again during any signal emissions
Handler ID of the handler to be unblocked
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the GObject.Object may be reused in future (for example, if it is
an instance variable of another object), it is recommended to clear the
pointer to null rather than retain a dangling pointer to a potentially
invalid GObject.Object instance. Use g_clear_object() for this.
Validates the setting. Each setting's properties have allowed values, and
some are dependent on other values (hence the need for connection). The
returned GLib.Error contains information about which property of the setting
failed validation, and in what way that property failed validation.
Optionalconnection: NM.Connectionthe NM.Connection that setting came from, or null if setting is being verified in isolation.
true if the setting is valid, false if it is not
Verifies the secrets in the setting. The returned GLib.Error contains information about which secret of the setting failed validation, and in what way that secret failed validation. The secret validation is done separately from main setting validation, because in some cases connection failure is not desired just for the secrets.
Optionalconnection: NM.Connectionthe NM.Connection that setting came from, or null if setting is being verified in isolation.
true if the setting secrets are valid, false if they are not
Virtualvfunc_the constructed function is called by g_object_new() as the
final step of the object creation process. At the point of the call, all
construction properties have been set on the object. The purpose of this
call is to allow for object initialisation steps that can only be performed
after construction properties have been set. constructed implementors
should chain up to the constructed call of their parent class to allow it
to complete its initialisation.
Virtualvfunc_Virtualvfunc_the dispose function is supposed to drop all references to other
objects, but keep the instance otherwise intact, so that client method
invocations still work. It may be run multiple times (due to reference
loops). Before returning, dispose should chain up to the dispose method
of the parent class.
Virtualvfunc_instance finalization function, should finish the finalization of
the instance begun in dispose and chain up to the finalize method of the
parent class.
Virtualvfunc_Virtualvfunc_Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
Virtualvfunc_the generic setter for all properties of this type. Should be
overridden for every type with properties. If implementations of
set_property don't emit property change notification explicitly, this will
be done implicitly by the type system. However, if the notify signal is
emitted explicitly, the type system will not emit it a second time.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
GObject.Closure to watch
Static_Staticcompat_Optionaldata: anyStaticfind_Staticget_Get the type of the enum that defines the values that the property accepts. It is only
useful for properties configured to accept values from certain enum type, otherwise
it will return G_TYPE_INVALID. Note that flags (children of G_TYPE_FLAGS) are also
considered enums.
Note that the GObject property might be implemented as an integer, actually, and not as enum. Find out what underlying type is used, checking the GObject.ParamSpec, before setting the GObject property.
the GType of the NMSetting instance
the name of the property
Staticinstall_Staticinstall_the id for the new property
the GObject.ParamSpec for the new property
Staticinterface_Find the GObject.ParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Staticinterface_Add a property to an interface; this is only useful for interfaces
that are added to GObject-derived types. Adding a property to an
interface forces all objects classes with that interface to have a
compatible property. The compatible property could be a newly
created GObject.ParamSpec, but normally
g_object_class_override_property() will be used so that the object
class only needs to provide an implementation and inherits the
property description, default value, bounds, and so forth from the
interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
GObject.TypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the GObject.ParamSpec for the new property
Staticinterface_Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Staticlist_Staticlookup_Returns the GObject.GType of the setting's class for a given setting name.
a setting name
StaticnewvStaticoverride_the new property ID
the name of a property registered in a parent class or in an interface of this class.
Wi-Fi Security Settings