Optionalproperties: Partial<Gtk.SizeGroup.ConstructorProps>Internal$signalsCompile-time signal type information.
This instance property is generated only for TypeScript type checking. It is not defined at runtime and should not be accessed in JS code.
Static$gtypeSince 2.8ignore_If true, unmapped widgets are ignored when determining
the size of the group.
since 3.22: Measuring the size of hidden widgets has not worked reliably for a long time. In most cases, they will report a size of 0 nowadays, and thus, their size will not affect the other size group members. In effect, size groups will always operate as if this property was true. Use a Gtk.Stack instead to hide widgets while still having their size taken into account.
Since 2.8ignoreIf true, unmapped widgets are ignored when determining
the size of the group.
since 3.22: Measuring the size of hidden widgets has not worked reliably for a long time. In most cases, they will report a size of 0 nowadays, and thus, their size will not affect the other size group members. In effect, size groups will always operate as if this property was true. Use a Gtk.Stack instead to hide widgets while still having their size taken into account.
Adds a widget to a Gtk.SizeGroup. In the future, the requisition
of the widget will be determined as the maximum of its requisition
and the requisition of the other widgets in the size group.
Whether this applies horizontally, vertically, or in both directions
depends on the mode of the size group. See gtk_size_group_set_mode().
When the widget is destroyed or no longer referenced elsewhere, it will be removed from the size group.
the Gtk.Widget to add
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget GObject.Object instance to be updated with the same value of the "active" property of the action GObject.Object instance.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
GObject.Binding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A GObject.Object can have multiple bindings.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Complete version of g_object_bind_property().
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well. The transform_from function is only used in case
of bidirectional bindings, otherwise it will be ignored
The binding will automatically be removed when either the source or the
target instances are finalized. This will release the reference that is
being held on the GObject.Binding instance; if you want to hold on to the
GObject.Binding instance, you will need to hold a reference to it.
To remove the binding, call g_binding_unbind().
A GObject.Object can have multiple bindings.
The same user_data parameter will be used for both transform_to
and transform_from transformation functions; the notify function will
be called once, when the binding is removed. If you need different data
for each transformation function, please use
g_object_bind_property_with_closures() instead.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
Optionaltransform_to: BindingTransformFuncthe transformation function from the source to the target, or null to use the default
Optionaltransform_from: BindingTransformFuncthe transformation function from the target to the source, or null to use the default
Optionalnotify: DestroyNotifya function to call when disposing the binding, to free resources used by the transformation functions, or null if not required
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of
g_object_bind_property_full(), using GClosures instead of
function pointers.
the property on source to bind
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Blocks a handler of an instance so it will not be called during any signal emissions
Handler ID of the handler to be blocked
SignalconnectSignalconnect_Constructs a child of buildable with the name name.
Gtk.Builder calls this function if a “constructor” has been specified in the UI definition.
Gtk.Builder used to construct this object
name of child to construct
the constructed child
This is similar to gtk_buildable_parser_finished() but is
called once for each custom tag handled by the buildable.
This is called at the end of each custom element handled by the buildable.
Gtk.Builder used to construct this object
child object or null for non-child tags
name of tag
Optionaldata: anyuser data that will be passed in to parser functions
This is called for each unknown element under <child>.
a Gtk.Builder used to construct this object
child object or null for non-child tags
name of tag
true if a object has a custom implementation, false if it doesn't.
Disconnects a handler from an instance so it will not be called during any future or currently ongoing emissions of the signal it has been connected to.
Handler ID of the handler to be disconnected
SignalemitThis function is intended for GObject.Object implementations to re-enforce
a [floating][floating-ref] object reference. Doing this is seldom
required: all GInitiallyUnowneds are created with a floating reference
which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
GObject.Object::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
the data if found, or null if no such data exists.
Returns if invisible widgets are ignored when calculating the size.
true if invisible widgets are ignored.
Gets the current mode of the size group. See gtk_size_group_set_mode().
the current mode of the size group.
Gets the name of the buildable object.
Gtk.Builder sets the name based on the
[GtkBuilder UI definition][BUILDER-UI]
used to construct the buildable.
the name set with gtk_buildable_set_name()
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling GObject.Value.unset.
Note that GObject.Object.get_property is really intended for language bindings, GObject.Object.get is much more convenient for C programming.
The name of the property to get
Return location for the property value. Can be an empty GObject.Value initialized by G_VALUE_INIT (auto-initialized with expected type since GLib 2.60), a GObject.Value initialized with the expected property type, or a GObject.Value initialized with a transformable type
This function gets back user data pointers stored via
g_object_set_qdata().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Returns the list of widgets associated with size_group.
a GLib.SList of widgets. The list is owned by GTK+ and should not be modified.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Checks whether object has a [floating][floating-ref] reference.
true if object has a floating reference
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than
g_object_notify().
One way to avoid using g_object_notify() from within the
class that registered the properties, and using g_object_notify_by_pspec()
instead, is to store the GParamSpec used with
g_object_class_install_property() inside a static array, e.g.:
typedef enum
{
PROP_FOO = 1,
PROP_LAST
} MyObjectProperty;
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", NULL, NULL,
0, 100,
50,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the GObject.ParamSpec of a property installed on the class of object.
Increases the reference count of object.
Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type
of object will be propagated to the return type (using the GCC typeof()
extension), so any casting the caller needs to do on the return type must be
explicit.
the same object
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
object
Removes a widget from a Gtk.SizeGroup.
the Gtk.Widget to remove
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Sets multiple properties of an object at once. The properties argument should be a dictionary mapping property names to values.
Object containing the properties to set
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a GLib.Quark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the GLib.Quark storage growing unbounded.
name of the key
Optionaldata: anydata to associate with that key
Sets whether unmapped widgets should be ignored when calculating the size.
whether unmapped widgets should be ignored when calculating the size
Sets the Gtk.SizeGroupMode of the size group. The mode of the size group determines whether the widgets in the size group should all have the same horizontal requisition (Gtk.SizeGroupMode.HORIZONTAL) all have the same vertical requisition (Gtk.SizeGroupMode.VERTICAL), or should all have the same requisition in both directions (Gtk.SizeGroupMode.BOTH).
the mode to set for the size group.
Sets the name of the buildable object.
name to set
Sets a property on an object.
The name of the property to set
The value to set the property to
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
the data if found, or null if no such data exists.
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of
g_object_steal_qdata() would have left the destroy function set,
and thus the partial string list would have been freed upon
g_object_set_qdata_full().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Stops a signal's emission by the given signal name. This will prevent the default handler and any subsequent signal handlers from being invoked.
Name of the signal to stop emission of
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one GObject.Object::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Unblocks a handler so it will be called again during any signal emissions
Handler ID of the handler to be unblocked
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the GObject.Object may be reused in future (for example, if it is
an instance variable of another object), it is recommended to clear the
pointer to null rather than retain a dangling pointer to a potentially
invalid GObject.Object instance. Use g_clear_object() for this.
Virtualvfunc_Virtualvfunc_Constructs a child of buildable with the name name.
Gtk.Builder calls this function if a “constructor” has been specified in the UI definition.
Gtk.Builder used to construct this object
name of child to construct
Virtualvfunc_the constructed function is called by g_object_new() as the
final step of the object creation process. At the point of the call, all
construction properties have been set on the object. The purpose of this
call is to allow for object initialisation steps that can only be performed
after construction properties have been set. constructed implementors
should chain up to the constructed call of their parent class to allow it
to complete its initialisation.
Virtualvfunc_Virtualvfunc_This is called at the end of each custom element handled by the buildable.
Gtk.Builder used to construct this object
child object or null for non-child tags
name of tag
Optionaldata: anyuser data that will be passed in to parser functions
Virtualvfunc_This is called for each unknown element under <child>.
a Gtk.Builder used to construct this object
child object or null for non-child tags
name of tag
Virtualvfunc_Virtualvfunc_the dispose function is supposed to drop all references to other
objects, but keep the instance otherwise intact, so that client method
invocations still work. It may be run multiple times (due to reference
loops). Before returning, dispose should chain up to the dispose method
of the parent class.
Virtualvfunc_instance finalization function, should finish the finalization of
the instance begun in dispose and chain up to the finalize method of the
parent class.
Virtualvfunc_Virtualvfunc_Gets the name of the buildable object.
Gtk.Builder sets the name based on the
[GtkBuilder UI definition][BUILDER-UI]
used to construct the buildable.
Virtualvfunc_Virtualvfunc_Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
Virtualvfunc_Virtualvfunc_Virtualvfunc_Sets the name of the buildable object.
name to set
Virtualvfunc_the generic setter for all properties of this type. Should be
overridden for every type with properties. If implementations of
set_property don't emit property change notification explicitly, this will
be done implicitly by the type system. However, if the notify signal is
emitted explicitly, the type system will not emit it a second time.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
GObject.Closure to watch
StaticnewStatic_Staticcompat_Optionaldata: anyStaticfind_Staticinstall_Staticinstall_the id for the new property
the GObject.ParamSpec for the new property
Staticinterface_Find the GObject.ParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Staticinterface_Add a property to an interface; this is only useful for interfaces
that are added to GObject-derived types. Adding a property to an
interface forces all objects classes with that interface to have a
compatible property. The compatible property could be a newly
created GObject.ParamSpec, but normally
g_object_class_override_property() will be used so that the object
class only needs to provide an implementation and inherits the
property description, default value, bounds, and so forth from the
interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
GObject.TypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the GObject.ParamSpec for the new property
Staticinterface_Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Staticlist_StaticnewvStaticoverride_the new property ID
the name of a property registered in a parent class or in an interface of this class.
Gtk.SizeGroup provides a mechanism for grouping a number of widgets together so they all request the same amount of space. This is typically useful when you want a column of widgets to have the same size, but you can’t use a Gtk.Grid widget.
In detail, the size requested for each widget in a Gtk.SizeGroup is the maximum of the sizes that would have been requested for each widget in the size group if they were not in the size group. The mode of the size group (see
gtk_size_group_set_mode()) determines whether this applies to the horizontal size, the vertical size, or both sizes.Note that size groups only affect the amount of space requested, not the size that the widgets finally receive. If you want the widgets in a Gtk.SizeGroup to actually be the same size, you need to pack them in such a way that they get the size they request and not more. For example, if you are packing your widgets into a table, you would not include the Gtk.AttachOptions.FILL flag.
Gtk.SizeGroup objects are referenced by each widget in the size group, so once you have added all widgets to a Gtk.SizeGroup, you can drop the initial reference to the size group with
g_object_unref(). If the widgets in the size group are subsequently destroyed, then they will be removed from the size group and drop their references on the size group; when all widgets have been removed, the size group will be freed.Widgets can be part of multiple size groups; GTK+ will compute the horizontal size of a widget from the horizontal requisition of all widgets that can be reached from the widget by a chain of size groups of type Gtk.SizeGroupMode.HORIZONTAL or Gtk.SizeGroupMode.BOTH, and the vertical size from the vertical requisition of all widgets that can be reached from the widget by a chain of size groups of type Gtk.SizeGroupMode.VERTICAL or Gtk.SizeGroupMode.BOTH.
Note that only non-contextual sizes of every widget are ever consulted by size groups (since size groups have no knowledge of what size a widget will be allocated in one dimension, it cannot derive how much height a widget will receive for a given width). When grouping widgets that trade height for width in mode Gtk.SizeGroupMode.VERTICAL or Gtk.SizeGroupMode.BOTH: the height for the minimum width will be the requested height for all widgets in the group. The same is of course true when horizontally grouping width for height widgets.
Widgets that trade height-for-width should set a reasonably large minimum width by way of Gtk.Label.width_chars for instance. Widgets with static sizes as well as widgets that grow (such as ellipsizing text) need no such considerations.
GtkSizeGroup as GtkBuildable
Size groups can be specified in a UI definition by placing an
<object>element withclass="GtkSizeGroup"somewhere in the UI definition. The widgets that belong to the size group are specified by a<widgets>element that may contain multiple<widget>elements, one for each member of the size group. The ”name” attribute gives the id of the widget.An example of a UI definition fragment with GtkSizeGroup: