Optionalproperties: Partial<Gtk.NumerableIcon.ConstructorProps>Internal$signalsCompile-time signal type information.
This instance property is generated only for TypeScript type checking. It is not defined at runtime and should not be accessed in JS code.
Static$gtypeCreates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget GObject.Object instance to be updated with the same value of the "active" property of the action GObject.Object instance.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
GObject.Binding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A GObject.Object can have multiple bindings.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Complete version of g_object_bind_property().
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well. The transform_from function is only used in case
of bidirectional bindings, otherwise it will be ignored
The binding will automatically be removed when either the source or the
target instances are finalized. This will release the reference that is
being held on the GObject.Binding instance; if you want to hold on to the
GObject.Binding instance, you will need to hold a reference to it.
To remove the binding, call g_binding_unbind().
A GObject.Object can have multiple bindings.
The same user_data parameter will be used for both transform_to
and transform_from transformation functions; the notify function will
be called once, when the binding is removed. If you need different data
for each transformation function, please use
g_object_bind_property_with_closures() instead.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
Optionaltransform_to: BindingTransformFuncthe transformation function from the source to the target, or null to use the default
Optionaltransform_from: BindingTransformFuncthe transformation function from the target to the source, or null to use the default
Optionalnotify: DestroyNotifya function to call when disposing the binding, to free resources used by the transformation functions, or null if not required
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of
g_object_bind_property_full(), using GClosures instead of
function pointers.
the property on source to bind
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Blocks a handler of an instance so it will not be called during any signal emissions
Handler ID of the handler to be blocked
SignalconnectSignalconnect_Disconnects a handler from an instance so it will not be called during any future or currently ongoing emissions of the signal it has been connected to.
Handler ID of the handler to be disconnected
SignalemitThis function is intended for GObject.Object implementations to re-enforce
a [floating][floating-ref] object reference. Doing this is seldom
required: all GInitiallyUnowneds are created with a floating reference
which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
GObject.Object::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Returns the icon name used as the base background image,
or null if there’s none.
an icon name, or null
Returns the value currently displayed by self.
the currently displayed value
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
the data if found, or null if no such data exists.
Returns the currently displayed label of the icon, or null.
the currently displayed label
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling GObject.Value.unset.
Note that GObject.Object.get_property is really intended for language bindings, GObject.Object.get is much more convenient for C programming.
The name of the property to get
Return location for the property value. Can be an empty GObject.Value initialized by G_VALUE_INIT (auto-initialized with expected type since GLib 2.60), a GObject.Value initialized with the expected property type, or a GObject.Value initialized with a transformable type
This function gets back user data pointers stored via
g_object_set_qdata().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Returns the Gtk.StyleContext used by the icon for theming,
or null if there’s none.
a Gtk.StyleContext, or null. This object is internal to GTK+ and should not be unreffed. Use g_object_ref() if you want to keep it around
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Gets a hash for an icon.
a guint containing a hash for the icon, suitable for use in a GLib.HashTable or similar data structure.
Checks whether object has a [floating][floating-ref] reference.
true if object has a floating reference
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than
g_object_notify().
One way to avoid using g_object_notify() from within the
class that registered the properties, and using g_object_notify_by_pspec()
instead, is to store the GParamSpec used with
g_object_class_install_property() inside a static array, e.g.:
typedef enum
{
PROP_FOO = 1,
PROP_LAST
} MyObjectProperty;
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", NULL, NULL,
0, 100,
50,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the GObject.ParamSpec of a property installed on the class of object.
Increases the reference count of object.
Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type
of object will be propagated to the return type (using the GCC typeof()
extension), so any casting the caller needs to do on the return type must be
explicit.
the same object
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
object
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Serializes a Gio.Icon into a GLib.Variant. An equivalent Gio.Icon can be retrieved
back by calling g_icon_deserialize() on the returned value.
As serialization will avoid using raw icon data when possible, it only
makes sense to transfer the GLib.Variant between processes on the same machine,
(as opposed to over the network), and within the same file system namespace.
a GLib.Variant, or null when serialization fails. The GLib.Variant will not be floating.
Sets multiple properties of an object at once. The properties argument should be a dictionary mapping property names to values.
Object containing the properties to set
Updates the icon to use icon as the base background image.
If icon is null, self will go back using style information
or default theming for its background image.
If this method is called and an icon name was already set as
background for the icon, icon will be used, i.e. the last method
called between gtk_numerable_icon_set_background_gicon() and
gtk_numerable_icon_set_background_icon_name() has always priority.
Updates the icon to use the icon named icon_name from the
current icon theme as the base background image. If icon_name
is null, self will go back using style information or default
theming for its background image.
If this method is called and a Gio.Icon was already set as
background for the icon, icon_name will be used, i.e. the
last method called between gtk_numerable_icon_set_background_icon_name()
and gtk_numerable_icon_set_background_gicon() has always priority.
Optionalicon_name: stringan icon name, or null
Sets the currently displayed value of self to count.
The numeric value is always clamped to make it two digits, i.e.
between -99 and 99. Setting a count of zero removes the emblem.
If this method is called, and a label was already set on the icon,
it will automatically be reset to null before rendering the number,
i.e. the last method called between gtk_numerable_icon_set_count()
and gtk_numerable_icon_set_label() has always priority.
a number between -99 and 99
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a GLib.Quark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the GLib.Quark storage growing unbounded.
name of the key
Optionaldata: anydata to associate with that key
Sets the currently displayed value of self to the string
in label. Setting an empty label removes the emblem.
Note that this is meant for displaying short labels, such as roman numbers, or single letters. For roman numbers, consider using the Unicode characters U+2160 - U+217F. Strings longer than two characters will likely not be rendered very well.
If this method is called, and a number was already set on the
icon, it will automatically be reset to zero before rendering
the label, i.e. the last method called between
gtk_numerable_icon_set_label() and gtk_numerable_icon_set_count()
has always priority.
Optionallabel: stringa short label, or null
Sets a property on an object.
The name of the property to set
The value to set the property to
Updates the icon to fetch theme information from the given Gtk.StyleContext.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
the data if found, or null if no such data exists.
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of
g_object_steal_qdata() would have left the destroy function set,
and thus the partial string list would have been freed upon
g_object_set_qdata_full().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Stops a signal's emission by the given signal name. This will prevent the default handler and any subsequent signal handlers from being invoked.
Name of the signal to stop emission of
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one GObject.Object::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Generates a textual representation of icon that can be used for
serialization such as when passing icon to a different process or
saving it to persistent storage. Use g_icon_new_for_string() to
get icon back from the returned string.
The encoding of the returned string is proprietary to Gio.Icon except in the following two cases
If icon is a Gio.FileIcon, the returned string is a native path
(such as /path/to/my icon.png) without escaping
if the Gio.File for icon is a native file. If the file is not
native, the returned string is the result of g_file_get_uri()
(such as sftp://path/to/my%20icon.png).
If icon is a Gio.ThemedIcon with exactly one name and no fallbacks,
the encoding is simply the name (such as network-server).
An allocated NUL-terminated UTF8 string or null if icon can't be serialized. Use g_free() to free.
Unblocks a handler so it will be called again during any signal emissions
Handler ID of the handler to be unblocked
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the GObject.Object may be reused in future (for example, if it is
an instance variable of another object), it is recommended to clear the
pointer to null rather than retain a dangling pointer to a potentially
invalid GObject.Object instance. Use g_clear_object() for this.
Virtualvfunc_the constructed function is called by g_object_new() as the
final step of the object creation process. At the point of the call, all
construction properties have been set on the object. The purpose of this
call is to allow for object initialisation steps that can only be performed
after construction properties have been set. constructed implementors
should chain up to the constructed call of their parent class to allow it
to complete its initialisation.
Virtualvfunc_Virtualvfunc_the dispose function is supposed to drop all references to other
objects, but keep the instance otherwise intact, so that client method
invocations still work. It may be run multiple times (due to reference
loops). Before returning, dispose should chain up to the dispose method
of the parent class.
Virtualvfunc_Virtualvfunc_instance finalization function, should finish the finalization of
the instance begun in dispose and chain up to the finalize method of the
parent class.
Virtualvfunc_Virtualvfunc_Gets a hash for an icon.
Virtualvfunc_Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
Virtualvfunc_Serializes a Gio.Icon into a GLib.Variant. An equivalent Gio.Icon can be retrieved
back by calling g_icon_deserialize() on the returned value.
As serialization will avoid using raw icon data when possible, it only
makes sense to transfer the GLib.Variant between processes on the same machine,
(as opposed to over the network), and within the same file system namespace.
Virtualvfunc_the generic setter for all properties of this type. Should be
overridden for every type with properties. If implementations of
set_property don't emit property change notification explicitly, this will
be done implicitly by the type system. However, if the notify signal is
emitted explicitly, the type system will not emit it a second time.
Virtualvfunc_Serializes the icon into string tokens.
This is can be invoked when g_icon_new_for_string() is called.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
GObject.Closure to watch
StaticnewStaticnew_Creates a new Gtk.NumerableIcon which will themed according
to the passed Gtk.StyleContext. This is a convenience constructor
that calls gtk_numerable_icon_set_style_context() internally.
a Gio.Icon to overlay on
Removes all the emblems from icon.
Static_Staticcompat_Optionaldata: anyStaticfind_Staticinstall_Staticinstall_the id for the new property
the GObject.ParamSpec for the new property
Staticinterface_Find the GObject.ParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Staticinterface_Add a property to an interface; this is only useful for interfaces
that are added to GObject-derived types. Adding a property to an
interface forces all objects classes with that interface to have a
compatible property. The compatible property could be a newly
created GObject.ParamSpec, but normally
g_object_class_override_property() will be used so that the object
class only needs to provide an implementation and inherits the
property description, default value, bounds, and so forth from the
interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
GObject.TypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the GObject.ParamSpec for the new property
Staticinterface_Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Staticlist_StaticnewvStaticoverride_the new property ID
the name of a property registered in a parent class or in an interface of this class.
GtkNumerableIcon is a subclass of Gio.EmblemedIcon that can show a number or short string as an emblem. The number can be overlayed on top of another emblem, if desired.
It supports theming by taking font and color information from a provided Gtk.StyleContext; see
gtk_numerable_icon_set_style_context().Typical numerable icons:
