Optionalproperties: Partial<GstVideo.VideoBufferPool.ConstructorProps>The parent of the object. Please note, that when changing the 'parent' property, we don't emit GObject.Object::notify and Gst.Object.SignalSignatures.deep_notify | Gst.Object::deep-notify signals due to locking issues. In some cases one can use Gst.Bin.SignalSignatures.element_added | Gst.Bin::element-added or Gst.Bin.SignalSignatures.element_removed | Gst.Bin::element-removed signals on the parent to achieve a similar effect.
SignalconnectSignalconnect_SignalemitStaticnewAcquires a buffer from pool. buffer should point to a memory location that
can hold a pointer to the new buffer. When the pool is empty, this function
will by default block until a buffer is released into the pool again or when
the pool is set to flushing or deactivated.
params can contain optional parameters to influence the allocation.
Optionalparams: BufferPoolAcquireParamsparameters.
a Gst.FlowReturn such as Gst.FlowReturn.FLUSHING when the pool is inactive.
Attach the Gst.ControlBinding to the object. If there already was a Gst.ControlBinding for this property it will be replaced.
The object's reference count will be incremented, and any floating
reference will be removed (see gst_object_ref_sink())
the Gst.ControlBinding that should be used
false if the given binding has not been setup for this object or has been setup for a non suitable property, true otherwise.
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget GObject.Object instance to be updated with the same value of the "active" property of the action GObject.Object instance.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
GObject.Binding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A GObject.Object can have multiple bindings.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Complete version of g_object_bind_property().
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
If flags contains GObject.BindingFlags.BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well. The transform_from function is only used in case
of bidirectional bindings, otherwise it will be ignored
The binding will automatically be removed when either the source or the
target instances are finalized. This will release the reference that is
being held on the GObject.Binding instance; if you want to hold on to the
GObject.Binding instance, you will need to hold a reference to it.
To remove the binding, call g_binding_unbind().
A GObject.Object can have multiple bindings.
The same user_data parameter will be used for both transform_to
and transform_from transformation functions; the notify function will
be called once, when the binding is removed. If you need different data
for each transformation function, please use
g_object_bind_property_with_closures() instead.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
Optionaltransform_to: BindingTransformFuncthe transformation function from the source to the target, or null to use the default
Optionaltransform_from: BindingTransformFuncthe transformation function from the target to the source, or null to use the default
Optionalnotify: DestroyNotifya function to call when disposing the binding, to free resources used by the transformation functions, or null if not required
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of
g_object_bind_property_full(), using GClosures instead of
function pointers.
the property on source to bind
the target GObject.Object
the property on target to bind
flags to pass to GObject.Binding
a GObject.Closure wrapping the transformation function from the source to the target, or null to use the default
a GObject.Closure wrapping the transformation function from the target to the source, or null to use the default
the GObject.Binding instance representing the binding between the two GObject.Object instances. The binding is released whenever the GObject.Binding reference count reaches zero.
Blocks a handler of an instance so it will not be called during any signal emissions
Handler ID of the handler to be blocked
Disconnects a handler from an instance so it will not be called during any future or currently ongoing emissions of the signal it has been connected to.
Handler ID of the handler to be disconnected
This function is intended for GObject.Object implementations to re-enforce
a [floating][floating-ref] object reference. Doing this is seldom
required: all GInitiallyUnowneds are created with a floating reference
which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
GObject.Object::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Gets a copy of the current configuration of the pool. This configuration
can be modified and used for the gst_buffer_pool_set_config() call.
a copy of the current configuration of pool.
Gets the corresponding Gst.ControlBinding for the property. This should be unreferenced again after use.
name of the property
the Gst.ControlBinding for property_name or null if the property is not controlled.
Obtain the control-rate for this object. Audio processing Gst.Element
objects will use this rate to sub-divide their processing loop and call
gst_object_sync_values() in between. The length of the processing segment
should be up to control-rate nanoseconds.
If the object is not under property control, this will return
GST_CLOCK_TIME_NONE. This allows the element to avoid the sub-dividing.
The control-rate is not expected to change if the element is in Gst.State.PAUSED or Gst.State.PLAYING.
the control rate in nanoseconds
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
the data if found, or null if no such data exists.
Gets a number of GValues for the given controlled property starting at the
requested time. The array values need to hold enough space for n_values of
GObject.Value.
This function is useful if one wants to e.g. draw a graph of the control curve or apply a control curve sample by sample.
the name of the property to get
the time that should be processed
the time spacing between subsequent values
array to put control-values in
true if the given array could be filled, false otherwise
Returns a copy of the name of object.
Caller should g_free() the return value after usage.
For a nameless object, this returns null, which you can safely g_free()
as well.
Free-function: g_free
the name of object. g_free() after usage. MT safe. This function grabs and releases object's LOCK.
Gets a null terminated array of string with supported bufferpool options for
pool. An option would typically be enabled with
gst_buffer_pool_config_add_option().
a null terminated array of strings.
Generates a string describing the path of object in
the object hierarchy. Only useful (or used) for debugging.
Free-function: g_free
a string describing the path of object. You must g_free() the string after usage. MT safe. Grabs and releases the Gst.Object's LOCK for all objects in the hierarchy.
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling GObject.Value.unset.
Note that GObject.Object.get_property is really intended for language bindings, GObject.Object.get is much more convenient for C programming.
The name of the property to get
Return location for the property value. Can be an empty GObject.Value initialized by G_VALUE_INIT (auto-initialized with expected type since GLib 2.60), a GObject.Value initialized with the expected property type, or a GObject.Value initialized with a transformable type
This function gets back user data pointers stored via
g_object_set_qdata().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Gets the value for the given controlled property at the requested time.
the name of the property to get
the time the control-change should be read from
the GValue of the property at the given time, or null if the property isn't controlled.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Check if the object has active controlled properties.
true if the object has active controlled properties
Check if object has an ancestor ancestor somewhere up in
the hierarchy. One can e.g. check if a Gst.Element is inside a Gst.Pipeline.
a Gst.Object to check as ancestor
true if ancestor is an ancestor of object.
Check if object has an ancestor ancestor somewhere up in
the hierarchy. One can e.g. check if a Gst.Element is inside a Gst.Pipeline.
a Gst.Object to check as ancestor
true if ancestor is an ancestor of object. MT safe. Grabs and releases object's locks.
Check if parent is the parent of object.
E.g. a Gst.Element can check if it owns a given Gst.Pad.
a Gst.Object to check as parent
false if either object or parent is null. true if parent is the parent of object. Otherwise false. MT safe. Grabs and releases object's locks.
Checks if the bufferpool supports option.
an option
true if the buffer pool contains option.
Checks if pool is active. A pool can be activated with the
gst_buffer_pool_set_active() call.
true when the pool is active.
Checks whether object has a [floating][floating-ref] reference.
true if object has a floating reference
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than
g_object_notify().
One way to avoid using g_object_notify() from within the
class that registered the properties, and using g_object_notify_by_pspec()
instead, is to store the GParamSpec used with
g_object_class_install_property() inside a static array, e.g.:
typedef enum
{
PROP_FOO = 1,
PROP_LAST
} MyObjectProperty;
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", NULL, NULL,
0, 100,
50,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the GObject.ParamSpec of a property installed on the class of object.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
object
Removes the corresponding Gst.ControlBinding. If it was the last ref of the binding, it will be disposed.
the binding
true if the binding could be removed.
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Sets multiple properties of an object at once. The properties argument should be a dictionary mapping property names to values.
Object containing the properties to set
Controls the active state of pool. When the pool is inactive, new calls to
gst_buffer_pool_acquire_buffer() will return with Gst.FlowReturn.FLUSHING.
Activating the bufferpool will preallocate all resources in the pool based on the configuration of the pool.
Deactivating will free the resources again when there are no outstanding buffers. When there are outstanding buffers, they will be freed as soon as they are all returned to the pool.
the new active state
false when the pool was not configured or when preallocation of the buffers failed.
Sets the configuration of the pool. If the pool is already configured, and
the configuration hasn't changed, this function will return true. If the
pool is active, this method will return false and active configuration
will remain. Buffers allocated from this pool must be returned or else this
function will do nothing and return false.
config is a Gst.Structure that contains the configuration parameters for
the pool. A default and mandatory set of parameters can be configured with
gst_buffer_pool_config_set_params(), gst_buffer_pool_config_set_allocator()
and gst_buffer_pool_config_add_option().
If the parameters in config can not be set exactly, this function returns
false and will try to update as much state as possible. The new state can
then be retrieved and refined with gst_buffer_pool_get_config().
This function takes ownership of config.
true when the configuration could be set.
This function is used to disable the control bindings on a property for
some time, i.e. gst_object_sync_values() will do nothing for the
property.
property to disable
boolean that specifies whether to disable the controller or not.
This function is used to disable all controlled properties of the object for
some time, i.e. gst_object_sync_values() will do nothing.
boolean that specifies whether to disable the controller or not.
Change the control-rate for this object. Audio processing Gst.Element
objects will use this rate to sub-divide their processing loop and call
gst_object_sync_values() in between. The length of the processing segment
should be up to control-rate nanoseconds.
The control-rate should not change if the element is in Gst.State.PAUSED or Gst.State.PLAYING.
the new control-rate in nanoseconds.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a GLib.Quark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the GLib.Quark storage growing unbounded.
name of the key
Optionaldata: anydata to associate with that key
Enables or disables the flushing state of a pool without freeing or
allocating buffers.
whether to start or stop flushing
Sets the name of object, or gives object a guaranteed unique
name (if name is null).
This function makes a copy of the provided name, so the caller
retains ownership of the name it sent.
Optionalname: stringnew name of object
true if the name could be set. Since Objects that have a parent cannot be renamed, this function returns false in those cases. MT safe. This function grabs and releases object's LOCK.
Sets the parent of object to parent. The object's reference count will
be incremented, and any floating reference will be removed (see gst_object_ref_sink()).
true if parent could be set or false when object already had a parent or object and parent are the same. MT safe. Grabs and releases object's LOCK.
Sets a property on an object.
The name of the property to set
The value to set the property to
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
the data if found, or null if no such data exists.
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of
g_object_steal_qdata() would have left the destroy function set,
and thus the partial string list would have been freed upon
g_object_set_qdata_full().
A GLib.Quark, naming the user data pointer
The user data pointer set, or null
Stops a signal's emission by the given signal name. This will prevent the default handler and any subsequent signal handlers from being invoked.
Name of the signal to stop emission of
Returns a suggestion for timestamps where buffers should be split to get best controller results.
Returns the suggested timestamp or GST_CLOCK_TIME_NONE if no control-rate was set.
Sets the properties of the object, according to the GstControlSources that
(maybe) handle them and for the given timestamp.
If this function fails, it is most likely the application developers fault. Most probably the control sources are not setup correctly.
the time that should be processed
true if the controller values could be applied to the object properties, false otherwise
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one GObject.Object::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Unblocks a handler so it will be called again during any signal emissions
Handler ID of the handler to be unblocked
Clear the parent of object, removing the associated reference.
This function decreases the refcount of object.
MT safe. Grabs and releases object's lock.
Decrements the reference count on object. If reference count hits
zero, destroy object. This function does not take the lock
on object as it relies on atomic refcounting.
The unref method should never be called with the LOCK held since this might deadlock the dispose function.
Virtualvfunc_Acquires a buffer from pool. buffer should point to a memory location that
can hold a pointer to the new buffer. When the pool is empty, this function
will by default block until a buffer is released into the pool again or when
the pool is set to flushing or deactivated.
params can contain optional parameters to influence the allocation.
Optionalparams: BufferPoolAcquireParamsparameters.
Virtualvfunc_Allocate a buffer. the default implementation allocates buffers from the configured memory allocator and with the configured parameters. All metadata that is present on the allocated buffer will be marked as #GST_META_FLAG_POOLED and #GST_META_FLAG_LOCKED and will not be removed from the buffer in Gst.BufferPoolClass.SignalSignatures.reset_buffer | Gst.BufferPoolClass::reset_buffer. The buffer should have the #GST_BUFFER_FLAG_TAG_MEMORY cleared.
Optionalparams: BufferPoolAcquireParamsparameters.
Virtualvfunc_the constructed function is called by g_object_new() as the
final step of the object creation process. At the point of the call, all
construction properties have been set on the object. The purpose of this
call is to allow for object initialisation steps that can only be performed
after construction properties have been set. constructed implementors
should chain up to the constructed call of their parent class to allow it
to complete its initialisation.
Virtualvfunc_Virtualvfunc_Virtualvfunc_the dispose function is supposed to drop all references to other
objects, but keep the instance otherwise intact, so that client method
invocations still work. It may be run multiple times (due to reference
loops). Before returning, dispose should chain up to the dispose method
of the parent class.
Virtualvfunc_instance finalization function, should finish the finalization of
the instance begun in dispose and chain up to the finalize method of the
parent class.
Virtualvfunc_Enter the flushing state.
Virtualvfunc_Leave the flushing state.
Virtualvfunc_Free a buffer. The default implementation unrefs the buffer.
the Gst.Buffer to free
Virtualvfunc_Gets a null terminated array of string with supported bufferpool options for
pool. An option would typically be enabled with
gst_buffer_pool_config_add_option().
Virtualvfunc_Virtualvfunc_Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class
that registered the property, you should use g_object_notify_by_pspec()
instead.
Note that emission of the notify signal may be blocked with
g_object_freeze_notify(). In this case, the signal emissions are queued
and will be emitted (in reverse order) when g_object_thaw_notify() is
called.
Virtualvfunc_Virtualvfunc_Reset the buffer to its state when it was freshly allocated. The default implementation will clear the flags, timestamps and will remove the metadata without the #GST_META_FLAG_POOLED flag (even the metadata with #GST_META_FLAG_LOCKED). If the #GST_BUFFER_FLAG_TAG_MEMORY was set, this function can also try to restore the memory and clear the #GST_BUFFER_FLAG_TAG_MEMORY again.
the Gst.Buffer to reset
Virtualvfunc_Sets the configuration of the pool. If the pool is already configured, and
the configuration hasn't changed, this function will return true. If the
pool is active, this method will return false and active configuration
will remain. Buffers allocated from this pool must be returned or else this
function will do nothing and return false.
config is a Gst.Structure that contains the configuration parameters for
the pool. A default and mandatory set of parameters can be configured with
gst_buffer_pool_config_set_params(), gst_buffer_pool_config_set_allocator()
and gst_buffer_pool_config_add_option().
If the parameters in config can not be set exactly, this function returns
false and will try to update as much state as possible. The new state can
then be retrieved and refined with gst_buffer_pool_get_config().
This function takes ownership of config.
Virtualvfunc_the generic setter for all properties of this type. Should be
overridden for every type with properties. If implementations of
set_property don't emit property change notification explicitly, this will
be done implicitly by the type system. However, if the notify signal is
emitted explicitly, the type system will not emit it a second time.
Virtualvfunc_Start the bufferpool. The default implementation will preallocate min-buffers buffers and put them in the queue.
Subclasses do not need to chain up to the parent's default implementation if they don't want min-buffers based preallocation.
Virtualvfunc_Stop the bufferpool. the default implementation will free the preallocated buffers. This function is called when all the buffers are returned to the pool.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
GObject.Closure to watch
Static_Staticcheck_Checks to see if there is any object named name in list. This function
does not do any locking of any kind. You might want to protect the
provided list with the lock of the owner of the list. This function
will lock each Gst.Object in the list to compare the name, so be
careful when passing a list with a locked object.
a list of Gst.Object to check through
the name to search for
Staticcompat_Optionaldata: anyStaticconfig_Enables the option in config. This will instruct the bufferpool to enable
the specified option on the buffers that it allocates.
The options supported by pool can be retrieved with gst_buffer_pool_get_options().
a Gst.BufferPool configuration
an option to add
Staticconfig_Gets the allocator and params from config.
a Gst.BufferPool configuration
Staticconfig_Parses an available config and gets the option at index of the options API
array.
a Gst.BufferPool configuration
position in the option array to read
Staticconfig_Gets the configuration values from config.
a Gst.BufferPool configuration
Staticconfig_Checks if config contains option.
a Gst.BufferPool configuration
an option
Staticconfig_Retrieves the number of values currently stored in the options array of the
config structure.
a Gst.BufferPool configuration
Staticconfig_Sets the allocator and params on config.
One of allocator and params can be null, but not both. When allocator
is null, the default allocator of the pool will use the values in param
to perform its allocation. When param is null, the pool will use the
provided allocator with its default Gst.AllocationParams.
A call to gst_buffer_pool_set_config() can update the allocator and params
with the values that it is able to do. Some pools are, for example, not able
to operate with different allocators or cannot allocate with the values
specified in params. Use gst_buffer_pool_get_config() to get the currently
used values.
a Gst.BufferPool configuration
Optionalallocator: Gst.AllocatorOptionalparams: AllocationParamsStaticconfig_Configures config with the given parameters.
a Gst.BufferPool configuration
caps for the buffers
the size of each buffer, not including prefix and padding
the minimum amount of buffers to allocate.
the maximum amount of buffers to allocate or 0 for unlimited.
Staticconfig_Validates that changes made to config are still valid in the context of the
expected parameters. This function is a helper that can be used to validate
changes made by a pool to a config when gst_buffer_pool_set_config()
returns false. This expects that caps haven't changed and that
min_buffers aren't lower then what we initially expected.
This does not check if options or allocator parameters are still valid,
won't check if size have changed, since changing the size is valid to adapt
padding.
a Gst.BufferPool configuration
the excepted caps of buffers
the expected size of each buffer, not including prefix and padding
the expected minimum amount of buffers to allocate.
the expect maximum amount of buffers to allocate or 0 for unlimited.
Staticdefault_A default deep_notify signal callback for an object. The user data should contain a pointer to an array of strings that should be excluded from the notify. The default handler will print the new value of the property using g_print.
MT safe. This function grabs and releases object's LOCK for getting its
path string.
the GObject.Object that signalled the notify.
a Gst.Object that initiated the notify.
a GObject.ParamSpec of the property.
Optionalexcluded_props: string[]a set of user-specified properties to exclude or null to show all changes.
Staticfind_Staticinstall_Staticinstall_the id for the new property
the GObject.ParamSpec for the new property
Staticinterface_Find the GObject.ParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Staticinterface_Add a property to an interface; this is only useful for interfaces
that are added to GObject-derived types. Adding a property to an
interface forces all objects classes with that interface to have a
compatible property. The compatible property could be a newly
created GObject.ParamSpec, but normally
g_object_class_override_property() will be used so that the object
class only needs to provide an implementation and inherits the
property description, default value, bounds, and so forth from the
interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
GObject.TypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the GObject.ParamSpec for the new property
Staticinterface_Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Staticlist_StaticnewvStaticoverride_the new property ID
the name of a property registered in a parent class or in an interface of this class.
StaticreplaceAtomically modifies a pointer to point to a new object.
The reference count of oldobj is decreased and the reference count of
newobj is increased.
Either newobj and the value pointed to by oldobj may be null.
Optionaloldobj: Gst.Objectpointer to a place of a Gst.Object to replace
Optionalnewobj: Gst.Objecta new Gst.Object
Compile-time signal type information.
This instance property is generated only for TypeScript type checking. It is not defined at runtime and should not be accessed in JS code.